Grips are essential to your scooter as they take up shock. Grips will naturally wear and tear after frequent use. If your grips are torn or worn, the easiest way to switch them is with an air compressor. Make sure you have parental guidance.
If you discover your RILLA Stunt Scooter becomes a wobbly, make sure you examine your wheel axles, clamps, brakes or compression and tighten as necessary using allen keys.
Lubricating your Bearings
There are six bearings on a scooter (two in every wheel and two within the headset). In order to make sure that your scooter is at it’s best, you need to keep the wheel bearings and headset bearings lubricated. Place a drop of velocity cream or a lubricant on all sides of the wheel within the bearing. Spin the wheel to evenly distribute the lubricant. To grease the headset bearings you will need to loosen your compression, remove your bars and forks so you can access the bearings. Apply some lubricant on the bearings and spin them to evenly distribute the grease.
Shipping & Handling – Next Page >